- Color: Silver
- Dimension: 33.06" (Length) x 21.06" (Width) x 10.06" (Height)
- Design: Rectangle with a flat bottom
- Sink Material: 304 Stainless Steel, 16 Gauge
- Installation Type: Apron/Farmhouse Sink Installation
-Net Weight: 26.01 lbs
-Drain Hole Size: 5"
-Package Including: Kitchen sink, filter basket, hardwood cutting board, rollup drying rack, basket strainer drain, and bottom stainless steel grate.
Remove the countertop, doors, and drawers of the cabinet, be careful to avoid any damages.
The sink comes with a template to cut out the front of the cabinet. Before cutting out the front, apply painter’s tape to the area that will be cut out.
Mark the center of the cabinet for the template. Tape the template and mark the template onto the cabinet.
Remove the template and cut the area you marked. Sand the area you just cut.
Add three support boards for each side, and install them on the sides. Make sure the supports are touching the floor, not the bottom of the cabinet.
Using the template to mark and cut the countertop.
May need a second person to help to set the sink.
Install the countertop, then the installation is done.